Brownells Ar 15/M16 Combination Wrench US Specs & Supply
Reliable Gunsmith Rifle Wrenches by Brownells in US specification & supply
|
US gunsmith supply: An exact duplicate of the original factory/military design so you know it will fit and work. Use for several jobs: to remove the barrel nut; to remove and install old and new flash suppressors; to remove and install the lower receiver extension. Mfg: brownells specs: blued steel. 5" (12.7cm) long x 2" (5cm) wide x 1/4" (6.35mm) thick. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Brownells. US supply MPN: 080-216-015. Brownells ar 15/m16 combination wrench. Distributor SKU: 080216015-080216015-11454.
 Indicative Price: USD 34.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more gunsmith equipment, tools, supplies & gun parts : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Tapco Weapons Accessories Ar 15/M16 Armorer's Tool Tapco Armorer's Tool US Specs & Supply
USD 33.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Handy all-in-one tool handles the tasks necessary to build and maintain your ar-15 or m16. It's a barrel nut wrench, muzzle device wrench, spanner wrench, forearm wrench, flat tip screwdriver, a2 tube remover, receptacle for β½" drive/torque wrench, and a bottle opener. Long handle give plenty of leverage for buttstock and barrel removal/installation, and the β½" drive receptacle allows the use of a torque wrench, so you can get things tightened down correctly. It even has a flat face on one side that can be used as a hammer. Mfg: tapco weapons accessories specs: heat treated alloy steel, matte olive drab powder coat finish. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Tapco. US supply MPN: 16610. Tapco weapons accessories ar 15/m16 armorer's tool tapco armorer's tool. Distributor SKU: 100009876-100009876-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Surgeon Rifles Remington 700 Action Wrench Surgeon Action Wrench US Specs & Supply
USD 128.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Easy-to-use alternative to old-fashioned t-handle action wrenches is specifically designed to prevent damage to receiver when installing and removing barrels. Lets you torque a remington 700 or surgeon rifles action as close as possible to the barrel threads to eliminate unwanted twisting or bowing of the action that can result in distorted bolt raceways and other expensive damage. Inserts in the ejection port; the two "ears" fit in the raceways at the front ring. Insert a β½" drive ratchet handle or torque wrench and tighten/loosen the action to the barrel. Works on any length action. Mfg: surgeon rifles specs: steel, black oxide finish. Fits remington 700 and surgeon rifles receivers. Do not exceed 100 foot pounds torque. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Surgeon. US supply MPN: 100-003-675. Surgeon rifles remington 700 action wrench surgeon action wrench. Distributor SKU: 100003675-100003675-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Arrington Accuracy Works Ar 15/M16 Colt Law Enforcement Carbine Armorer's Wrench Armorer Wrench US Specs & Supply
USD 177.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Dedicated, heavy-duty wrenches are designed to enable easy removal and installation of the proprietary barrel nut on the colt le6940 advanced law enforcement carbine (alec). Self-contained armorer wrench features a large, 3/8" thick handle with a β½" square cutout for a torque wrench or breaker bar, plus a notch for removing the alec flash suppressor. Compact barrel nut wrench has the β½" torque driver/breaker bar cutout only. Mfg: arrington accuracy works specs: steel, parkerized, matte black. Armorer wrench, 9" (23cm) long overall, 1.25" (3.17cm) wide handle. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Arrington. US supply MPN: 100-005-370. Arrington accuracy works ar 15/m16 colt law enforcement carbine armorer's wrench armorer wrench. Distributor SKU: 100005370-100005370-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Tapco Weapons Accessories Ar Stock Wrench Gen Ii Enhanced US Specs & Supply
USD 9.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Multifunction wrench is machined from heat treated steel and features three lugs for a secure fit on mil-spec castle nuts. Wrench includes precision cutouts for the receiver extension tube and a1/a2 flash suppressor. Convenient, built-in bottle opener allows you to enjoy your favorite beverage when the job is finished. Wrench is coated in manganese phosphate for corrosion resistance while the rubberized grip provides both safety and comfort. Mfg: tapco weapons accessories specs: steel, manganese phosphate finish. Rubber coated handle, black. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Tapco. US supply MPN: 16609. Tapco weapons accessories ar stock wrench gen ii enhanced. Distributor SKU: 100015726-100015726-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Midwest Industries Cz Scorpion Pistol Barrel Nut Socket US Specs & Supply
USD 22.50
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: The midwest industries cz scorpion pistol barrel nut socket makes changing handguards on your scorpion pistol easier than ever! hex end of the socket accepts 1" wrench 1.5" long for good wrench socket engagement constructed of steel with black oxide finish proudly made in the usa the 1.5-inch long socket works with any standard 1-inch wrench and is machined from steel and given a durable black-oxide finish. An added benefit of using this socket is to eliminate the necessity of removing the retaining clip for the flash hider. The barrel-nut socket is made in the usa. Mfg: midwest industries, inc. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Midwest. US supply MPN: MICZSW. Midwest industries cz scorpion pistol barrel nut socket. Distributor SKU: 100026428-100026428-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Davidson Action Wrenches Davidson Rear Entry Action Wrench Remington Shilen Dga US Specs & Supply
USD 84.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Davidson action wrenches are designed for the switch barrel shooter with a custom built rifle. Manufactured from 7075-t6 aluminum, these tools are not designed to remove factory installed barrels. Action wrenches are used to break the action free from the barrel while the barrel is held in a barrel vise. This allows the shooter to change barrels in a matter of a few minutes. All rear action wrenches are inserted through the rear of the action and have a 3/4 inch hex end which requires a wrench for turning. Port wrenches are inserted through the action port and are turned by hand. Barrel vise available separately. Mfg: davidson. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Davidson. US supply MPN: DW2. Davidson action wrenches davidson rear entry action wrench remington shilen dga. Distributor SKU: 749005814-749005809-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Yankee Hill Machine Co. Forearm Wrench US Specs & Supply
USD 29.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Heavy, steel, spanner wrench makes it easy to tighten handguard barrel nuts to the correct torque. Notched end engages the indexing ring on yankee hill handguards and others with similar, slotted indexing rings for aligning the accessory rails. Mfg: yankee hill machine co., inc. Specs: steel, black oxide finish. 8" (20.3cm) long, 2" (5.1cm) wide, βό" (6.4mm) thick. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Yankee Hill. US supply MPN: YHM9621. Yankee hill machine co. forearm wrench. Distributor SKU: 100002090-100002090-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Precision Reflex Ar 15/M16 Barrel Nut Wrench Ar 15 Armorer's Barrel Nut Wrench US Specs & Supply
USD 59.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Heavy-duty wrench provides plenty of leverage for installing and removing barrel nuts when used with a 3/8" or β½" drive breaker bar, socket wrench, or torque wrench. Cut from 3/8" thick steel, with plenty of metal so it won't flex under pressure while transferring the torque evenly to the nut. Models available for ar-15/m16, armalite. Armorer's ar-15/m16 model has a built-in 10"-long handle for convenience, plus additional holes between pins help with proper gas tube alignment. Still includes 3/8" and β½" drive cutouts. Mfg: precision reflex, inc. Specs: 1018 steel, black oxide finish. Ar-15 fits mil-spec ar-15/m16/m4 and clones. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Precision. US supply MPN: 50084. Precision reflex ar 15/m16 barrel nut wrench ar 15 armorer's barrel nut wrench. Distributor SKU: 714000020-714000007-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Rock River Arms Ar 15 M4 Stock Wrench US Specs & Supply
USD 9.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Steel, dual function wrench lets you easily remove your old extension tube and install a new-style, a4 stock. Spanner has three lugs to fit the a4-style castle nut. Provides a non-slip fit so you can hand tighten the castle nut to the receiver. Also, the comfortable, rubber coated handle features a cutout to fit the receiver extension tube to remove the a1 or a2 stock. Mfg: rock river arms specs: steel, parkerized finish. 7-5/8" (19.3cm) long. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Rock River. US supply MPN: AR0165. Rock river arms ar 15 m4 stock wrench. Distributor SKU: 739000010-739000010-11454.
More Details : click here
SEARCH this site : click here
|
|
|
Gemtech Quickmount Installation Tool US Specs & Supply
USD 47.99
(Indicative price - actual current price possibly lower)
Gunsmith Rifle Wrenches US Specs & Supply
US gunsmith supply: Gemtech's handy little quickmount installation tool makes attaching any quickmount muzzle device, either flash hider or muzzle brake, fast and easy. The quickmount installation tool is notched for a snug, no-slip fit over the "ears" of all qm muzzle devices. Fits β½" ratchet or torque wrench (maximum 35 ft. Lbs. Torque) made of hardened steel compact, carry in your range back or tool kit, just in case your rifle's qm device shoots loose the quickmount installation tool is ideal for gunsmiths, gun shops, instructors, or gun owners who frequently install gemtech quickmount devices. Mfg: gemtech. Find here reliable & durable gunsmith supplies including gunsmith rifle wrenches by Gemtech. US supply MPN: 12164. Gemtech quickmount installation tool. Distributor SKU: 100024952-100024952-11454.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Ar 15/M16 Combination Wrench US Specs & Supply
|
 Copyright © Gunsmithings.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
