Kart Precision Barrel 1911 Precision Quality Barrel 6" 9mm Wilson/Nowlin Ramp Barrel US Specs & Supply
Reliable Handgun Barrels by Kart in US specification & supply
|
US gunsmith supply: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Find here reliable & durable gunsmith supplies including handgun barrels by Kart. US supply MPN: 472-000-015. Kart precision barrel 1911 precision quality barrel 6" 9mm wilson/nowlin ramp barrel. Distributor SKU: 472000015-472020045-10529.
 Indicative Price: USD 205.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more gunsmith equipment, tools, supplies & gun parts : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Nowlin 9mm Stainless Steel 1911 Gunsmith Barrel 5" Ramped US Specs & Supply
USD 259.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Triple heat treated, highest quality, super match-grade barrels deliver maximum accuracy. Groove and bore tolerances held to an amazing .0002" by electro-discharge cathode machining (ecm). Unique, pre-cut design of the top lugs requires only minor fitting to achieve maximum lug engagement. Rifling is ultra-smooth, uniform, and precise. Smoother bore boosts velocity with all barrel lengths. Angled edge on the driving band increases gas seal for reduced fouling with all types of bullets, plus longer barrel life. Short chambered, requires reaming to achieve correct headspace. Mfg: nowlin. Find here reliable & durable gunsmith supplies including handgun barrels by Nowlin. US supply MPN: RB95G. Nowlin 9mm stainless steel 1911 gunsmith barrel 5" ramped. Distributor SKU: 654000075-654000075-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Zev Technologies Match Barrels For G17 & G19 Match G19 Barrel Black US Specs & Supply
USD 237.50
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Zev technologies match grade drop-in glock replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416r) that was originally designed for use in match grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant. Zev match grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 ra is reached. During this process the barrels are held to a final dimension of /- 0.0002" for consistency and accuracy. The barr mfg: zev technologies. Find here reliable & durable gunsmith supplies including handgun barrels by ZEV. US supply MPN: BBL19DDLC. Zev technologies match barrels for g17 & g19 match g19 barrel black. Distributor SKU: 100019696-100019691-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Agency Arms Non Threaded Standard Line Barrel G34 Stainless Steel US Specs & Supply
USD 160.00
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: The agency arms non-threaded standard line barrel provides several clear benefits over the oem glock 34 barrel, ensuring that users can easily upgrade their pistols with a simple drop-in component. The agency arms non-threaded standard line barrel is constructed using 416r stainless, increasing a gun's ability to fight off corrosion and environmental wear. Rifling performed using a pulled broach barrel twist rate is 1:10 total barrel length is 5.32 inches stainless steel finish fits: glock34 gen 1-4 the agency arms non-threaded standard line barrel looks clean with a natural finish and minimal machining marks indicating the company and t mfg: agency arms llc. Find here reliable & durable gunsmith supplies including handgun barrels by Agency. US supply MPN: NT1G34SS. Agency arms non threaded standard line barrel g34 stainless steel. Distributor SKU: 100024656-100024656-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Apex Tactical Specialties Inc Gunsmith Fit Threaded Barrel For S&W M&P 5" US Specs & Supply
USD 259.95
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: The apex grade gunsmith fit threaded barrel for the smith & wesson m&p is available in either a 5.00" or 4.25" option. The barrel requires fitting by a competent gunsmith. The stainless steel barrel features a 1:10" twist rate. The design increases accuracy performance making the m&p capable of shooting as small as a 1-inch grouping at 25 yards. Accuracy test results based on use of a mechanical rest. Final results may vary based on shooter ability, ammunition selection and variations in factory firearm tolerances. Barrel is threaded for β½-28", and includes a thread protector. Works with all smith & wesson 9mm m&p pistols requiring a 5.00 mfg: apex tactical specialties inc. Find here reliable & durable gunsmith supplies including handgun barrels by Apex. US supply MPN: 105058. Apex tactical specialties inc gunsmith fit threaded barrel for s&w m&p 5". Distributor SKU: 100023279-100023279-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Bar Sto Precision Machine 1911 Semi Fit Barrels 1911 Govt 5" Semi Fit 9mm Barrel P/C US Specs & Supply
USD 264.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: These 1911 government 5" barrels are "semi fit", meaning they general require little to no fitting. Barrels may drop-in, but expect some fitting to be necessary. Barrels come with barrel link, bushing, & link pin. 45acp barrel is non-ramped. 9mm barrels are available with a wilson/nowlin (w/n) or para/clark (p/c) ramp. Bar-sto precision machine has been making some of the finest auto-pistol barrels since 1971. Bar-sto barrels have been used by the u.S. Marine corps marksman unit since 1977. All bar-sto pistol barrels are machined from solid 416 stainless steel bar stock which has been heat treated 39 to 43 rc and 180,000 psi tensile str mfg: bar-sto precision machine specs: fits, 1911 government with a 5" slide. Construction, stainless steel, hardened to 39 to 43 rc. Includes, barrel, bushing, link & link pin. Find here reliable & durable gunsmith supplies including handgun barrels by Bar-Sto. US supply MPN: 100-015-619. Bar sto precision machine 1911 semi fit barrels 1911 govt 5" semi fit 9mm barrel p/c. Distributor SKU: 100015619-100015617-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Bar Sto Precision Machine Sig Sauer 320 Semi Fit 9mm Barrel US Specs & Supply
USD 237.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: The bar-sto semi-fit barrel has been the choice of the u.S marine corps marksman unit since 1977. If you're looking to upgrade the barrel of your sig sauer 320, choose the brand that's been leading the way in pistol barrels since 1971. Bar-sto barrels are heat treated 39 to 43 rc and 180,000 psi tensile strength. Generally requires little to no fitting stock barrel length for use with sig sauer 320 only the bar-sto barrel designed for your sig 320 features a 1:16 twist. Mfg: bar-sto precision machine. Find here reliable & durable gunsmith supplies including handgun barrels by Bar-Sto. US supply MPN: 100-024-935. Bar sto precision machine sig sauer 320 semi fit 9mm barrel. Distributor SKU: 100024935-100024935-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel .45 Acp C/P US Specs & Supply
USD 179.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Find here reliable & durable gunsmith supplies including handgun barrels by Kart. US supply MPN: 472-000-004. Kart precision barrel 1911 precision quality barrel 5" kart 1911 auto barrel .45 acp c/p. Distributor SKU: 472000004-472020045-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Xact Fit Barrel Kit 5" Barrel .40 S&W Fits W/N US Specs & Supply
USD 241.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize o.D. For precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. (n/r) non-ramped. (w/n) wilson/nowlin ramp. (c/p) clark/para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions. Find here reliable & durable gunsmith supplies including handgun barrels by Kart. US supply MPN: 472-002-040. Kart precision barrel 1911 xact fit barrel kit 5" barrel .40 s&w fits w/n. Distributor SKU: 472002040-472001045-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Sig Sauer P938 9mm Threaded Barrel P938 9mm Luger Threaded Barrel US Specs & Supply
USD 219.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Upgrade or replace the barrel on your p938 with this original sig sauer part. The threaded barrel is chambered in 9mm and allows you to attach a suppressor or other muzzle device. A knurled thread cap protects the end when no device is attached. Sig sauer factory replacement pistol barrels are specially heat-treated for toughness and durability. Thread pitch: .5x28 tpi mfg: sig sauer. Find here reliable & durable gunsmith supplies including handgun barrels by SIG Sauer. US supply MPN: BBL9389T. Sig sauer p938 9mm threaded barrel p938 9mm luger threaded barrel. Distributor SKU: 100035161-100035161-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Nowlin Officers Model 3.5" 45acp Nr Gunmith Fit Barrel Officers Model 3.5" 45acp Nr Gunsmith Fit Barrel US Specs & Supply
USD 237.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Triple heat treated, highest quality, super match-grade barrels deliver maximum accuracy. Groove and bore tolerances held to an amazing .0002" by electro-discharge cathode machining (ecm). Unique, pre-cut design of the top lugs requires only minor fitting to achieve maximum lug engagement. Rifling is ultra-smooth, uniform, and precise. Smoother bore boosts velocity with all barrel lengths. Angled edge on the driving band increases gas seal for reduced fouling with all types of bullets, plus longer barrel life. Chamber may require finish reaming, check with headspace gauge before firing. Does not include link pin or link. Mfg: nowlin. Find here reliable & durable gunsmith supplies including handgun barrels by Nowlin. US supply MPN: SB3BBGO45. Nowlin officers model 3.5" 45acp nr gunmith fit barrel officers model 3.5" 45acp nr gunsmith fit barrel. Distributor SKU: 654000060-654000060-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Silencerco Sig P320 Threaded Barrel 9mm 1/2 28 Threaded Barrel For Sig P320 Compact 9mm 1/2x28 US Specs & Supply
USD 149.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Silencerco's sig p320 threaded barrel replaces your pistol's factory barrel so you're ready to install a sound suppressor. Each silencerco sig p320 threaded barrel comes with a thread protector to keep the threads from being damaged when shooting without a suppressor. Machined from durable, high-grade 416r stainless steel non-reflective black nitride finish 1/2"-28 tpi threads accept a wide variety of popular pistol suppressors 1-10" twist rate preserves your 320's accuracy models available for both full-size and compact p320 precision machined to factory specs, the silencerco sig p320 threaded barrel won't alte mfg: silencerco. Find here reliable & durable gunsmith supplies including handgun barrels by Silencerco. US supply MPN: AC2486. Silencerco sig p320 threaded barrel 9mm 1/2 28 threaded barrel for sig p320 compact 9mm 1/2x28. Distributor SKU: 100025593-100025592-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Kart Precision Barrel 1911 Precision Quality Barrel 5" Kart 1911 Auto Barrel 9mm Std US Specs & Supply
USD 185.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Forged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard barrel, non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped barrel, fully supports the case head; gives direct feeding from magazine to chamber. Requires machining of frame. Gunsmithing fitting required. Std, standard barrel, non-ramped. W/n, wilson/nowlin ramp. C/p, clark/para ordnance ramp mfg: kart precision barrel specs: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or commander 4.25" (10.8cm) lengths. Find here reliable & durable gunsmith supplies including handgun barrels by Kart. US supply MPN: 472-000-009. Kart precision barrel 1911 precision quality barrel 5" kart 1911 auto barrel 9mm std. Distributor SKU: 472000009-472020045-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Us Armament Corporation Colt 1903 Barrel .32 Acp US Specs & Supply
USD 128.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Built to original factory specifications, this reproduction colt 1903 replacement barrel will fit all late-production types 3-5 and u.S. Armament's reproduction 1903 general officer's pocket pistol. These barrels are machined from high-grade ordnance steel using the latest technology and come in-the-white, with no markings. Even better, the colt 1903 replacement barrel is also available in a threaded model, ready to accept the latest sound suppressor, so you can enjoy shooting your classic without creating "noise pollution!" correct, original .32 acp chambering helps you preserve, or regain, your 1903's superb accuracy 6 lugs at rear, mfg: us armament corporation. Find here reliable & durable gunsmith supplies including handgun barrels by US Armament. US supply MPN: 19032. Us armament corporation colt 1903 barrel .32 acp. Distributor SKU: 100023938-100023938-10529.
More Details : click here
SEARCH this site : click here
|
|
|
Ed Brown 1911 9mm Suppressor Ready Threaded Barrels 1911 9mm 5" Government Threaded Barrel US Specs & Supply
USD 249.99
(Indicative price - actual current price possibly lower)
Handgun Barrels US Specs & Supply
US gunsmith supply: Identical to the standard drop-in ed brown barrel, but longer length and threaded for use with suppressors. Thread size is 1/2" x 28 tpi rh. Includes link, link pin, bushing and thread protector. Barrel accuracy comes from using the highest quality materials and manufacturing methods. Ed brown products is committed to both. The barrels are made from t-416 modified, gun barrel quality stainless steel bar stock, just like a benchrest rifle barrel. T-416 is certified pure, there are no foreign materials, and no hard or soft spots to worry about. It is stress-relieved and heat-treated prior to final rifling and refinishing. Ed brown barrels are precision machine cut from mfg: ed brown. Find here reliable & durable gunsmith supplies including handgun barrels by Ed Brown. US supply MPN: 9259MMSR. Ed brown 1911 9mm suppressor ready threaded barrels 1911 9mm 5" government threaded barrel. Distributor SKU: 087000113-087000113-10529.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Kart Precision Barrel 1911 Precision Quality Barrel 6" 9mm Wilson/Nowlin Ramp Barrel US Specs & Supply
|
 Copyright © Gunsmithings.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
